DC basics
Loaded Voltage Divider Experiment
Connect a load and watch the divider output change using a stated DC model.
Circuit Lab / Free wiring + 8 guided experiments
Change a value. Inspect the circuit. Follow the response. Explore DC basics, charging, filtering and switching with stated, fixed-topology models. Browse the experiments here; sign in with Google to open any lab.
Free wiring editor
Draw components and wires, run your circuit, inspect live voltage and current, and save or export your work. Start with a divider, RC circuit, LED or blank canvas.
DC basics
Connect a load and watch the divider output change using a stated DC model.
DC basics
Sweep the supply voltage and see how resistance controls current and dissipated power.
Semiconductors
Change the series resistor and LED forward drop to compare current, power, and an illustrative LED glow.
Transient response
Move through time as a capacitor charges or discharges. Compare capacitor voltage, resistor voltage, and current.
Transient response
Apply a DC step to a series resistor and inductor. Watch current build and compare stored magnetic energy.
Signals & filters
Feed a sine wave into an RC filter and observe attenuation and phase lag as frequency changes.
Semiconductors
Compare a sine input with the rectified voltage across a resistive load and inspect each half cycle.
Semiconductors
Adjust an NPN transistor’s base drive and see the transition from cutoff through active operation to saturation.
Each experiment has a fixed circuit and an explicit analytical model. Check the model limits on its page when comparing it with real hardware.