Circuit Builder
Drag in components, wire them together, and run your own experiments.
Sign in to run your circuit or load examples.
Click two terminals or drag between them
Drop your first component
Drag in a battery, then connect its terminals to a load.
Current directionNo currentScroll to zoom · Drag empty canvas to pan0 parts · 0 wires
InspectorSelect a part or wire to inspect its readings.
Steady-state DC models. Bulb resistance follows its rating. The speaker is an active buzzer. Toggle each switch to compare the branches.
Build a simple DC circuit
- Drag a battery, switch, and light bulb onto the canvas.
- Join the terminals with wires so the battery, switch, and bulb form one loop.
- Select a part and open Parameters to change values such as the battery voltage.
- Sign in and press Run. Close the switch and follow the current through the bulb.
How can two switches control one light?
Two changeover switches choose between a pair of traveler wires. The lamp lights when both switches select the same traveler, so flipping either switch changes the lamp state.
Try the interactive bedroom light example without signing in. It uses a 6 V DC model to illustrate switch behavior.
For charging and filtering, browse the guided circuit experiments.