Calculators / Voltage Divider Resistor Selector
Voltage Divider Resistor Selector
Find standard resistor pairs for a target voltage, with load resistance, a source-current budget, and a nominal error limit. Compare five ranked designs.
Inputs
Try the prefilled example, or enter your own values.
Result
Calculate to see the result and worked steps. Changing an input clears the previous result.
How to use
- Enter the supply, target output, total source-current budget, and allowed nominal output error.
- Choose a preferred series and the allowed resistance range for each part. Add the output load if present.
- Compare the candidates, then open the chosen pair in the divider or tolerance tool with its values already filled.
Formula and assumptions
With a load: Rbottom = R2 ∥ RL; Vout = Vin × Rbottom / (R1 + Rbottom); Isource = Vin / (R1 + Rbottom).
Ideal DC resistors and a fixed passive load. Searches E12/E24 values within your 0.1 Ω–10 MΩ component range. Limits apply to nominal values; no active regulation, ADC sampling transient, or thermal approval is implied.
Sources
Worked example
For 5 V to 2.5 V with a 0.5 mA source-current budget and no load, an E24 pair of 5.1 kΩ + 5.1 kΩ gives exactly 2.5 V at about 490.2 µA.
Common mistakes
A divider is not a regulated power supply. Load current uses part of the source-current budget, and resistor tolerance can move the output outside a nominal error limit. E-series selection does not assign a tolerance rating.