Calculators / Standard Resistor Combination Calculator

Standard Resistor Combination Calculator

Approximate a target resistance using up to four standard resistors in series, parallel or supported mixed arrangements. Compare E12/E24 combinations, equivalent values, and errors.

Inputs

Try the prefilled example, or enter your own values.

Result

Calculate to see the result and worked steps. Changing an input clears the previous result.

How to use

  1. Enter the desired resistance and unit. Choose an arrangement and maximum of two, three or four parts.
  2. Select E12/E24 and the minimum and maximum values available for each component.
  3. Compare five candidates. Use the network link to check current and dissipation for a pure or mixed solution. Parentheses show exactly how each mixed branch connects.

Formula and assumptions

Series: Req = R1 + R2. Parallel: Req = 1 / (1/R1 + 1/R2). Relative error = (Req / Rtarget − 1) × 100%.

Up to four positive ideal resistors. Three-part mixed networks and four-part pairs (a+b)∥(c+d) / (a∥b)+(c∥d) are supported; other four-part nesting and bridge networks are excluded. Each part must be within the selected 0.1 Ω–10 MΩ range. Results are nominal; inventory, temperature, parasitics, and ratings are not checked.

Sources

Worked example

A 1 kΩ resistor in series with 2.2 kΩ gives 3.2 kΩ exactly. Two 1 kΩ resistors in parallel give 500 Ω. Your selected range and series determine which alternatives are available.

Common mistakes

The + sign in a component list names the parts; the arrangement column determines how to connect them. A parallel equivalent is smaller than either part, and a nominal exact match still has real component tolerance.

Continue your circuit