Calculators / RC Time Constant & Charging Calculator

RC Time Constant & Charging Calculator

Explore capacitor charging and discharging with an RC curve, initial voltage, time constant, and the time needed to reach a target voltage.

Inputs

Try the prefilled example, or enter your own values.

Result

Calculate to see the result and worked steps. Changing an input clears the previous result.

How to use

  1. Choose charging or discharge to 0 V, then enter R, C, and the initial capacitor voltage.
  2. Set a sample time and target progress. On discharge, progress means the fraction removed from the initial voltage, not the fraction remaining.
  3. Compare the curve and 1τ–5τ table. The ideal final voltage is approached asymptotically; 100% takes no finite time.

Formula and assumptions

τ = R × C. V(t) = Vf + (V₀ − Vf) × e^(−t/τ). Time to transition fraction p: t = −τ × ln(1 − p).

One ideal resistor, one ideal capacitor, a fixed ideal voltage source, and a stated initial voltage. No leakage, ESR, changing loads, or voltage-dependent capacitance. This is an analytical model, not a general circuit simulator.

Sources

Worked example

With 10 kΩ and 100 µF, τ = 1 s. Charging from 0 V toward 5 V gives 3.1606 V after 1 s and 4.9663 V after 5 s. Reaching 99% takes about 4.6052 s.

Common mistakes

A capacitor does not become completely charged at 5τ: it has completed about 99.326% of the transition. A connected load can change both the final voltage and the effective resistance.

Continue your circuit